Obd2 Software For Elm 327
This article will guide you how to install ELM327 USB cable/scanner on your Windows computer. It will then work with OBD2 software (like award-winning TOAD) and your car.
Oct 21, 2015 ScanMaster ELM V2.1 software for ELM 327 is the registered and final 327 ELM activation software. ScanMaster ELM Keygen ScanMaster ELM V2.1. Version V2.1 Build:771. Free download ScanMaster ELM V2.1 ScanMasterELM2.1.104.771.exe. Compare with the Demo version software, you can realize more functions if you work with ScanMaster ELM V2.1.104.771. - At the end of this article you will find a link to download the program. Remember that the password to unzip it is: obd2-elm327.es. Once the ScanMaster program is installed, we will have to configure it properly. Logically for each version of ELM327 will be configured in a different way.
(If you don’t do this, then OBD software is not going to work. So it’s CRUCIAL that you follow below steps).
EconTool for Nissan ELM327. Currently, the program is able to work with a gasoline Nissans engines via two Nissan protocols (Nissan Consult-1 and Nissan Consult-2) - it is not OBDII. If you have an engine with OBDII protocol, you need to use other programs. The program works via BlueTooth keychains chip ELM327 or via BTNC1 adapter. OBD Auto Doctor is available for Windows, Mac and Linux. Offers software for Elm and mOByDic based interfaces. A basic software package for reading trouble codes, and real-time data. Available for Windows and Unix/Linux. A SourceForge project that provides a GUI for controlling ELM327 devices.
(Cable should NOT be connected to your laptop yet. Only connect it when instructions say so.)
Windows XP, 7:
Windows 8:
STEP 2: Test If ELM327 USB Cable Is Installed Correctly
(You can now CONNECT your ELM327 USB cable to any port on your laptop.)
Ok, we’re almost ready to start scanning your vehicle.
First, let’s ensure that everything is working fine!
Windows Vista/7/8: Control Panel » System » Device Manager
Windows XP: Control Panel » System » “Hardware” tab » Device Manager
- FT232R USB UART
- Prolific USB-to-Serial…
- USB Serial Port
- Silicon Labs CP210x USB to UART Bridge
NONE of above devices should have a yellow mark (Next) next to them.
YES: If none of the above has a yellow mark, then congratulations! You’re ready to begin scanning your car(s).
NO: If any of above devices has a yellow mark, then go to Troubleshooting below on how to install the last set of driver files that’ll fix it…
Troubleshooting: Fix for Troublesome ELM327 USB Cables…
(You can now CONNECT your ELM327 USB cable to any port on your laptop.)
Download Driver Pack.
And unextract the ZIP file anywhere on your computer.
Step 2: Access Device Manager
Windows Vista/7/8: Control Panel » System » Device Manager
Windows XP: Control Panel » System » “Hardware” tab » Device Manager
Step 3: Install Latest Drivers
Right-click on any of the named devices with a yellow mark — and click on “Update Driver Software“. Example…
Then Browse to the folder where you unextracted Driver Pack 4.
That’s it! The yellow mark should be gone.
YES: You’re ready to begin scanning your car(s).
NO: Otherwise, if you still see a yellow mark, go to Advanced Troubleshooting.
Quick Start Guide On How To Begin Scanning Your Car…
Step 1: Install your OBD software. Don’t launch it yet.
Step 2: Connect the cable to your computer and car.
Step 3: Place the key in the ignition and turn it forward to the “ON” position. (Position where all dashboard lights are on. It’s one position before engine starts.)
Step 4: Launch your OBD software. Click “Connect”, and it’ll auto-connect to the car.
Free Obd2 Programming Software
TIP: If you want maximum data reported from the car, you’ll need to have vehicles engine running.
Obd2 Software For Elm327 Phone
And yes, you can drive your car while you’re diagnosing it. Just be careful. NEVER take your eyes of the road!